TV Feature Wall Cost
in Malaysia (2026)

Prices below are indicative Klang Valley ranges. Your actual cost depends on wall size, cladding material and built-in storage complexity — get an exact quote on WhatsApp.

How much does a TV feature wall cost in Malaysia?

TV feature wall pricing in the Klang Valley depends on three main variables: wall size, cladding material and whether built-in cabinetry is included. A pure decorative wall (cladding + TV mount, no storage) is significantly cheaper than a full built-in unit with cabinets and display shelves. Here are 2026 indicative ranges:

Cost by design type

TV feature walls come in several distinct design styles, each with a different price range:

Cladding material comparison

The cladding material determines both the look and the budget of the TV wall. Here is a comparison of the most common options in Klang Valley homes:

Built-in storage: options and cost

The most practical TV walls combine a decorative feature with built-in storage. The storage element is often the majority of the total cost:

• Open display shelves only: Adds RM1,500–RM4,000 to the base wall cost depending on the number of shelves and material.
• Base cabinets (closed storage, below TV): Adds RM2,000–RM6,000 for a 2–3 m run of cabinets. Commonly used for AV equipment, routers, gaming consoles.
• Full-height unit (floor-to-ceiling cabinets + TV recess + shelves): This becomes a full carpentry job. Budget RM8,000–RM18,000 for a 3–4 m wide full-height built-in unit in moisture-resistant plywood with laminate finish.
• Hidden TV / motorised lift: Adds RM3,000–RM8,000 for a motorised lift mechanism. Less common in residential but popular in premium condos.

What affects TV feature wall cost the most?

• Wall width and height. A standard 3.5 m wide TV wall in a condo is very different from a full 5 m living room wall. Every extra metre of width adds significantly to material and labour cost.
• Cladding material. The jump from laminate (RM30–RM60/sq ft) to natural marble (RM80–RM200+/sq ft) can double or triple the wall panel cost alone.
• Built-in storage quantity. Cabinets are the biggest single line item when the wall includes full built-in storage. Each running foot of cabinetry at mid-range specification costs RM300–RM600/running ft.
• LED lighting and electrical work. Cove lighting, downlights recessed into the wall unit and concealed power points for the TV and AV equipment add RM500–RM3,000 depending on complexity.
• False wall build-up. Some designs require a false wall (plywood framing extending 100–300 mm from the main wall) to create recesses, hide conduit runs and achieve a flush TV-mount look. This adds RM1,000–RM4,000 in carpentry framing cost.

Design comparison table

Worked example: KL condo living room TV wall (3.5 m wide)

An illustrative mid-range budget for a 3.5 m wide × 2.8 m high TV feature wall in a Klang Valley condo. Treat this as a planning guide, not a quote.

A basic version with paint finish, no cabinets and exposed wiring would cost RM3,000–RM4,500. A premium version with full-height floor-to-ceiling units and porcelain cladding would run RM18,000–RM25,000.

Design tips for Malaysian homes

• Keep the TV wall width proportional to the sofa viewing distance. A 65–75” TV needs 2.5–3.5 m of clear viewing distance from the sofa. Match the wall width to the TV size — a 5 m wide wall with a 55” TV looks unbalanced.
• Conceal the aircon fan coil in the TV wall if the layout allows. Some living rooms have the aircon positioned above the TV wall. Building the false wall slightly deeper to house the aircon casing gives a clean, flush look — but requires careful planning of the condensate drain and service access.
• Use warm-white (2700–3000 K) LED strip behind the TV. Bias lighting reduces eye strain in Malaysian evenings and makes the TV image appear more vivid. Built-in LED cove lighting is the most popular upgrade to a TV feature wall.
• Plan your AV equipment before finalising the design. Confirm the number of HDMI ports, speaker positions, soundbar recess (if any), and gaming console ventilation requirements before cabinet openings are fixed.
• Avoid heavy natural stone on a non-load-bearing lightweight wall. Marble and granite cladding adds significant weight. Confirm the wall substrate can bear the load or use lighter porcelain or cultured stone alternatives.

See the wallpaper cost guide → if you are considering wallpaper as the feature panel. For overall project budgeting, use the renovation cost calculator → and renovation cost guide →.

Wiring and conduit planning

Wiring planning is where TV walls often go wrong if the design and electrical work are not coordinated:

• Conceal the TV power point. The power point should be positioned directly behind the TV mounting area, not to the side, so the cable is invisible from the front.
• Run HDMI and data conduit. Install a 20–25 mm conduit run from behind the TV to the base cabinet (where AV equipment lives). This allows future cable changes without breaking the wall.
• Soundbar and speaker provisions. Decide whether you want in-wall speaker cable runs before the wall is closed up — retrospective cable fishing through a closed wall is expensive.
• USB and data points. A USB-A charging point on the side of the lower cabinet is a simple addition that is much appreciated after the fact.
• Coordinate with the aircon contractor if concealing the fan coil unit in the wall — the drain line and refrigerant pipes need dedicated conduit and access panel provisions.

Common mistakes to avoid

• No conduit run for wires. Surface-mounting all cables (HDMI, power, soundbar) looks messy. Always run conduit before closing the wall — it is impossible to add later without major work.
• Building the false wall too thin. A false wall less than 80 mm deep cannot properly conceal a TV cable conduit run, aircon connection or service panel. Plan for at least 100 mm depth if anything is being concealed.
• Choosing natural stone without checking wall load capacity. Marble cladding on a lightweight gypsum partition or a non-structural plywood false wall can cause the wall to bow or fail. Use porcelain or cultured stone as a lightweight alternative.
• Under-speccing cabinet ventilation for AV equipment. AV amplifiers, set-top boxes and gaming consoles generate heat. Enclosed cabinets with no ventilation gaps cause equipment to overheat. Include ventilation slots or a quiet cabinet fan.
• Forgetting the TV mounting position until after the wall is built. The TV mount type (fixed, tilt, full-motion swivel) must be decided before the wall is closed up, as a full-motion mount requires different blocking (reinforced plywood backing in the exact TV mount location).

How long does a TV feature wall take?

A typical Klang Valley TV feature wall project takes 3–10 working days depending on complexity:

• Basic wallpaper or paint feature wall: 1–2 days (after wall preparation).
• Laminate panel wall with base cabinets: 3–5 days (carpentry fabrication + installation).
• Full-height built-in unit with cladding and lighting: 5–10 days including custom fabrication time (2–3 days in workshop + 2–3 days on-site installation).
• Stone/porcelain tile cladding: Add 1–2 days for tile lay and grouting.

Electrical work (concealed wiring, lighting) should be done before the carpentry closes the wall, so sequence coordination between the carpenter and electrician matters.

How to choose a TV feature wall contractor

• Ask for a quote that itemises wall framing, cladding, cabinets and electrical separately — not a single lump sum. This lets you control each component.
• Confirm the conduit and wiring plan before work starts — who does the electrical, and is it included?
• Ask to see completed TV wall projects and check the quality of cladding alignment, cabinet door gaps and lighting uniformity.
• Confirm the cabinet board material (moisture-resistant plywood is preferred over melamine) and laminate brand/grade.
• Confirm LED strip brand and colour temperature — cheap LED strips have inconsistent colour and fail within 12–18 months.