A panel at a few ringgit a piece and a wall at a few thousand ringgit can both be right. Here is how to turn one into the other.
A per-piece price is a supply price for one panel; a per-sq-ft installed price is for a finished wall. To compare them, work out how many pieces the wall really needs (including cuts and wastage), then add trims, adhesive or clips, wall preparation and labour. ClickBina’s fluted guide publishes finished-wall figures per 100 sq ft — for example RM2,000 – RM3,500 for a factory-made MDF fluted panel fixed on site (indicative 2026, Klang Valley) — which is the basis to compare against.
Wall panel prices in Malaysia come in four different units, and most confusion starts when two of them are compared as if they were the same thing.
| Pricing unit | Where you see it | What it usually includes | What it usually leaves out |
|---|---|---|---|
| Per piece (per panel or sheet) | Shop listings, online stores, DIY suppliers | One panel | Trims, adhesive, clips, labour, wastage, delivery |
| Per sq ft, supply only | Supplier quotations | Panel material for the area | Labour, trims, preparation |
| Per sq ft, installed | Contractor quotations and cost guides | Material and labour for the area | Often preparation, electrical work, removal |
| Per wall or per job | Feature walls and TV walls | A finished design | Only what the quotation lists |
ClickBina’s WPC vs PS comparison notes that both profiles are typically sold per piece in Malaysian listings, and one DIY supplier lists PS fluted panels in 2400 mm lengths. A finished wall, by contrast, is normally quoted by area. The job of comparison is to turn the first into the second.
Start with the wall, not the shop listing. Measure the finished height (to the ceiling, cornice or bulkhead where the panel will stop) and the width, then check two numbers on the panel: its coverage width (the visible width once interlocked, which is narrower than the full width because of the tongue or overlap) and its length.
Want a first budget before you ask for quotes? Our Wall Panel Cost Calculator multiplies your wall area by the market range for the panel or finish you pick — a planning range, not a quotation.
ClickBina’s fluted wall panel guide makes the same point: panel is quoted by wall area but bought by the panel or the length, the two do not divide neatly, and a quotation should include a wastage allowance — ask what it is rather than assuming it is zero.
Flat sheets such as UV marble sheet work the same way, but the arithmetic is by sheet, and joints matter more. ClickBina’s UV marble sheet guide quotes one manufacturer’s sheets at 1220 mm by 2440-2900 mm. On a wall taller than the sheet, you pay for a second row of sheets and a horizontal joint, and a marble pattern may need extra sheets so the veins line up. Always ask where the joints will fall before comparing sheet prices.
These items are why the same panel can look cheap per piece and not cheap per finished wall. None of them are optional on a wall that is meant to look right.
These installed figures come from ClickBina’s own cost guides (indicative 2026, Klang Valley). They are the numbers to compare a converted per-piece price against.
| Finish | Indicative price | Basis | Source guide |
|---|---|---|---|
| Factory-made MDF fluted panel, fixed on site | RM2,000 – RM3,500 | Per 100 sq ft wall | Fluted wall panel guide |
| Site-fabricated timber slat (rubberwood or meranti) | RM3,000 – RM5,000 | Per 100 sq ft wall | Fluted wall panel guide |
| Solid teak or premium timber slat | RM4,500 – RM6,000+ | Per 100 sq ft wall | Fluted wall panel guide |
| Laminate or HPL on plywood | RM30 – RM60 | Per sq ft, installed | TV feature wall guide |
| PU 3D panels | RM20 – RM50 | Per sq ft, installed | TV feature wall guide |
| 3D PU or fibreglass panels | RM15 – RM45 | Per sq ft, supply | Feature wall guide |
| Wallpaper on wall (for comparison) | RM5 – RM15 | Per sq ft, installed | TV feature wall guide |
Tell us your room, wall size and budget on WhatsApp for a recommendation and quote — we reply within the hour.
💬 WhatsApp Your Wall SizeNote the basis column: a supply figure and an installed figure cannot be compared directly, and a per-wall figure depends on the wall size stated with it.
Put both quotations on the same basis before looking at the total. For each, write down the panel (core material, thickness, colour code), the area in sq ft, and whether trims, fixing, preparation, electrical and removal are included. Then compare installed price per sq ft of finished wall, and only then the total.
ClickBina’s fluted guide warns that a cheaper number usually means adhesive-only fixing, thinner board, no trims and no wastage allowance. The guide to reading a renovation quote makes the wider point: a per-sq-ft figure is a sanity check on the total, not a substitute for an itemised quote.
ClickBina supplies and installs wall panels by budget and use case in KL and Selangor, and quotes the finished wall with the panel, trims, fixing and preparation itemised. Tell us your room, wall size and budget on WhatsApp for a recommendation and quote; if you already have a per-piece price from a shop, send it too and we will show what an installed wall involves. We reply within the hour, the price we agree is a flat price with no hidden charges, and we are registered with SSM. A site visit is RM150, waived if you proceed.
How we estimated prices: every RM figure on this page is quoted unchanged from the ClickBina guides named above; they are indicative Klang Valley ranges for 2026, not fixed rates. We do not publish shop per-piece prices, because they change often and rarely state what is included.
Tell us your room, wall size and budget on WhatsApp for a recommendation and quote — we reply within the hour.
💬 WhatsApp Your Wall SizeTell us what you need — we reply within the hour.