Smart Home Installation
in KL & Selangor

What we install

A smart home is not one product. It is a set of devices that each do a simple job, a network that keeps them talking, and one app that lets you see and control everything from your phone. We install the devices and set up the app and the routines. Make sure the app accounts end up in your own name, so the household owns the system and nobody is locked out later.

We do the smart device, app and low-voltage side of the job. For smart switches and anything wired into the mains, we supply the devices and set up the app, and the switch or wiring work is done by an electrical contractor registered with Suruhanjaya Tenaga that we coordinate. That split matters more in Malaysian homes than the brochures admit, because many switch boxes were never given a neutral conductor and some devices need power where there is none today.

Most first enquiries are one of four jobs: lights and switches that can be controlled from the phone, a digital lock on the main door or grille, a doorbell with a camera, or motorised curtains. Each has its own guide: smart switch, smart bulb or relay, smart lock or digital lock, video doorbell or intercom and curtain motorisation.

Plan the whole house, then start small

The homes that work well were planned as a whole before the first device went in. Decide which app or ecosystem will run the house, which rooms matter most, and what must still work when the internet is down. Then start with the rooms you use every day and add the rest in stages. The room-by-room planning guide sets out a sensible order.

Choosing the ecosystem early saves the most money and frustration later. Aqara, Tuya-based brands, Xiaomi and Home Assistant each suit a different kind of household, and devices from one do not always join another. The ecosystem comparison lays out the trade-offs, and the Zigbee, WiFi, Matter and Thread explainer covers the radio standards underneath.

Condo or landed: how the scope changes

The same wish list plays out differently in a condo, a terrace house and a semi-D. The table is a planning guide, not a fixed scope.

Condo owners should read the condo smart home guide before buying door hardware, and terrace and semi-D owners the landed house guide. Doors are a special case: a unit entrance that is also a fire-rated door needs a lock chosen so the door keeps doing its job, which the fire-rated door lock guide explains, and grilles and condo doors have their own fitting issues in the condo door and grille lock guide.

Smart switches and lighting

Lighting is where most homes start, and where the Malaysian switch box causes the most surprises. A smart switch needs a little power for itself. Where the box has no neutral, a no-neutral switch draws that power through the lamp, which can make some LED lights glow faintly or flicker when they are off. The no-neutral retrofit guide explains the box survey, and the guide to bypass capacitors and LED flicker covers the fix for lamps that misbehave.

We supply the switches, pair them to the hub or app and set up scenes and schedules, such as porch lights that follow sunset or a single button that turns off the whole floor at night. Swapping a wall switch is electrical work under Malaysian law, so the switch itself goes in through an electrical contractor registered with Suruhanjaya Tenaga that we coordinate, and you deal with one job instead of two. Any mains electrical work, such as a new power point, a change at the distribution board or a hardwired switch that needs new wiring, must be done by an electrical contractor registered with Suruhanjaya Tenaga.

Locks, doorbells and intercoms

The front door is the second most common job. We fit digital and smart locks to main doors and grilles, set up the fingerprints, PIN codes and app access. Remove a code as soon as a helper, tenant or contractor no longer needs it. The digital lock installation guide explains what to check on your door before you buy a lock, and the digital lock problems guide covers battery and fingerprint faults.

At the gate or the unit door, a video doorbell or an app-linked intercom lets you see and talk to visitors from your phone. In a condo, the building intercom usually belongs to the management, so check before replacing anything; the intercom system guide compares the options. A camera that faces a shared corridor or a neighbour's door also raises privacy questions, so point it at your own entrance.

Curtains, aircon and the autogate

Motorised curtains open with the morning and close with the evening heat, and can join a scene with the lights. We install battery and USB-charged curtain motors, and motors that plug into a socket you already have. A motor that needs a new power point, or one wired into the mains, goes through the same partner route as the switches.

Older air-conditioners that have only an infrared remote can still be controlled from the phone through an IR blaster that learns the remote's buttons; the IR blaster guide explains what works and what does not, and the smart aircon control guide covers the alternatives.

A gate that already has a working motor can usually be opened from the phone with an app controller, so you no longer hunt for the remote. The WiFi autogate guide covers which motors accept one and what to keep as a backup.

WiFi, hubs and keeping it working

Most smart-home complaints are network complaints. A device that drops offline, a camera that freezes or a lock that will not answer the app is very often a weak WiFi signal at that spot. In double-storey homes the upstairs rooms and the porch are the usual dead zones; the WiFi dead zones guide explains why and how mesh WiFi fixes it. We set up mesh WiFi and hubs as part of a job, place them for coverage, and keep the smart devices on a network the household understands.

Think about outages too. Decide which devices must still work when the internet or the power is down, and choose ones that keep a local control, such as a physical button on the switch or a key on the lock. The water-leak sensor guide is a good example of a small device that earns its place.

Renovating? Lay the groundwork first

If the house is being renovated, the cheapest moment to prepare for a smart home is before plastering. That is when a neutral can be brought to every switch box, data points can go where the router and cameras will sit, and curtain boxes can be given power. The renovation pre-wiring checklist lists what to ask for. That groundwork is mains work for an electrical contractor; the devices and the app come after the walls are finished.

Cameras, sensors and alerts

Door, motion and leak sensors can send an alert to your phone the moment something happens, and cameras can be linked into the same app as the lights and the lock. Those alerts go to you, and you decide what to do. A guard-response service that watches alarms and sends someone out is a separate, licensed business. The WiFi camera vs CCTV guide and the home alarm guide help you choose between a phone-first setup and a full alarm or CCTV system.