Automatic Sliding Door Malaysia
Shop, Clinic & Office Cost (2026)

How an automatic sliding door works

Every automatic sliding door has the same four parts. The operator is a motor, gearbox, belt and control unit in a header box above the opening. The door leaves hang from rollers on a track in that header and are steadied by a floor guide. The sensors tell the controller when someone is coming and when the doorway is still occupied. The control panel or switch sets the mode: automatic, exit only, hold open, or locked.

Because the door slides rather than swings, it needs no space in front of the doorway and nobody has to push it. That is why it is the standard entrance for clinics, pharmacies, supermarkets and busy shops, and the simplest fix for an entrance that wheelchair users, parents with prams and elderly customers find hard to open. ClickBina's OKU access guide notes that heavy door closers are a common barrier at shop entrances.

Types of automatic sliding door

Sensors and safety

• Motion sensors on the header detect people approaching and open the door. They can be set to ignore people walking past the shopfront.
• Presence sensors watch the doorway itself and keep the door open while someone is standing in it.
• Safety beams or edge sensors stop and reverse the door if it meets an obstruction while closing.
• Adjustment matters. A door that opens for every passer-by wastes aircon; one set too narrow closes on slow walkers, trolleys and children.

Safety glass, visibility markings at eye level on clear glass, and correct closing speed and force are the basics an installer should confirm in writing.

Where automatic doors make sense

• Clinics and pharmacies: hands-free entry, accessible for patients, keeps aircon in.
• Shops and supermarkets: busy entrances where a swing door is held open all day.
• Offices and showrooms: a reception entrance, often tied to access control after hours.
• Condo and office lobbies: residents and visitors with bags, prams and trolleys.
• F&B with aircon: keeps cold air in without staff holding the door.

For a small shop with light traffic, a well-adjusted manual glass door on a floor spring may be enough; ClickBina's frameless glass shopfront door guide explains how closing speed is set.

Installing on a new or existing shopfront

An automatic door needs a header above the opening strong enough to carry the operator and the hanging leaves, a level floor for the guide, a power point for the operator, and room beside the opening for the leaves to slide into. In a new fit-out this is designed in from the start. On an existing shopfront, the fixed glass panels, the head of the frame and the floor finish often need changing; a frameless swing door on a floor spring cannot simply be motorised as a slider. Mall and building management usually have rules on shopfront changes, so get their approval first; our shopfront options guide covers frontage types and approvals.

Access control, night locking and escape routes

An automatic door can be tied to a card reader, keypad or face reader so it opens only for authorised people after hours, and many operators include an electric lock for night mode. Two points need settling before ordering:

• Escape route. If the door is on a fire escape route, it must let people out when the power or the system fails. ClickBina's door access guide explains fail-safe and fail-secure locks and why escape doors need settling first.
• Night security. A glass entrance is not a security barrier; a grille or shutter outside is still common for street shops.

Power cuts and battery backup

Without power, the operator stops. Ask what the door does in a power cut: some operators carry a battery that opens the door once or keeps it running for a while; others can be pushed open by hand once the motor releases. For a clinic or lobby, a battery backup is worth the cost. Find out how the door is locked and unlocked manually during a long outage, and who holds the key.

What an automatic sliding door costs

No ClickBina guide publishes a price for an automatic sliding door, because the operator brand, door type, glass, opening size and access control vary so much. These are ClickBina's published comparison and add-on figures (indicative 2026, Klang Valley).

What moves an automatic door quote: single, bi-parting or telescopic; opening width and height; framed or frameless glass and the glass type; changes to the existing shopfront and header; battery backup; access control and night locking; and whether a maintenance contract is included.

Maintenance and common faults

Keep the floor guide and track free of grit and mopping water, test the sensors regularly, and book a periodic service so worn rollers and belts are replaced before they fail.

How ClickBina can help

WhatsApp us your job details for a quote: the type of premises, the existing entrance, the rough opening width and whether you need access control. ClickBina is an experienced KL & Selangor contractor for whole-house refurbishment and trade coordination, so the shopfront, glass, power point, flooring and door can be planned as one job. We reply within the hour, and the price we agree is a flat price with no hidden charges.

Sources & methodology

• ClickBina sliding door design guide — manual aluminium sliding door price.
• ClickBina door access system guide — card and face access prices per door, fail-safe and fail-secure locks.
• ClickBina boom barrier guide — security-systems service visit price.
• ClickBina OKU access, frameless glass shopfront door and shopfront options guides — accessibility, floor springs and frontage approvals.

How we estimated prices: every RM figure on this page is quoted unchanged from the ClickBina guides named above; they are indicative Klang Valley ranges for 2026. Automatic doors themselves are quoted per job.